BOUNCE AND EFFECT MIRRORS FOR LASER SHOWS

Mirrors add a whole new dimension to a laser show. We supply 8” mirrors that are front surface laser mirrors. These front surface mirrors are specially designed for lasers so only one beam is reflected, conventional mirrors have the reflective surface at the back of the glass resulting in the glass reflecting and also the rear reflecting surface ( two beams instead of the desired one).

Our mirrors can be supplied in two styles. Both types can be adjusted on horizontal and vertical position but one of these has fine adjustment controls for horizontal and vertical position. Both can be supplied with standard 50mm C-clamps to allow installation on existing trussing.

Remote DMX Moving Yoke Bounce Mirrors add even more dimension to a laser show by extending the range of the lasers angle, with the moving mirror you can easily replicate the effects delivered by moving head lasers but with a far greater accurate .
220VAC, DMX-512, 8 or 16 Bit for higher resolution , 2 Sided Mirror for double hits, Continuous Y Axis Rotation, 360 degree X axis.

Mirror globes used very much back in the 1970 ball rooms are making a come back used in laser shows, the mirror globe when used in a laser show adds many new effects that usualy over tax the laser scanning system.
1, Laser hitting the mirror globe to create static stars or points on a ceiling. 2, Laser hitting the mirror globe to create rotating beams and points around the room.
3, A large power colour laser hitting the mirror globe gives hundreds of a defracted coloured beams scattered around the room.
The gobes we use have a motor fitted that can rotate clock or anti-clockwise and at vairiable speed from 2rpm to 15rpm (revolutions per minute).

Mirror globes can be supplied in sizes from 8 inches to 100 inches, larger globes give more beams at a smaller angle to each other, and smaller globes give fewer beams with a greater angle from each other.